UGGs have gained popularity worldwide over the years due to their cold insulation and body temperature regulation properties.
Nonetheless, these simple-looking boots tend to fade out over time, regardless of how much waterproofing spray you apply to them. So, can you dye your faded UGG boots? I did extensive research about this, and this is what I discovered!
Can You Dye UGGs In 2025?
You can dye UGGs since they’re made from sheepskin leather. Simply clean your sheepskin boots first to get rid of excess dirt. Consequently, apply and spread the suede dye on your shoes using an applicator. Let the dye sit on your UGGs for 24 hours to dry. Afterward, buff your boots with a suede brush to revive their tiny fibers.
To find out more about whether you can dye UGGs, how you can dye your faded UGGs, and more, keep on reading!
How Do You Dye UGGs?
While some people prefer dyeing their UGGs using the Rit dye method, the method demands the boots to be submerged in a dye bath for a considerable amount of time.
However, submerging your UGGs in a dye bath for a long time could make the winter boots lose their fluffiness or cause extensive damage to their delicate outer.
Luckily, there are other effective and safer ways to dye UGGs. Here’s a step-by-step guide on how you can restore your UGG boots’ color:
1. Gently Brush the UGG Boots
Gently brushing your UGG boots is the first step you should take before applying the suede dye on their outer surface.
Simply brush your boots using a soft-bristled suede brush to dust out any debris, dirt, or mold resting on your UGGs.
Besides getting rid of the troublesome dirt, gently brushing your UGGs before dyeing them makes your boots’ tiny fibers stand.
This, in turn, enables the suede dye to soak easily into your boots’ surface.
This being the case, gently brushing your UGG boots in the opposite direction you normally brush is recommended to raise the UGGs’ signature tiny fibers.
2. Thoroughly Clean the UGGs
If your UGG boots have seen better days or have extreme dirt that brushing can’t get rid of, it’s only wise to clean them thoroughly before applying suede dye on their surface.
Use clean, cool water, a gentle detergent, and a white cloth to scrub the dirty sheepskin leather on your boot’s outer, remove excess dirt, and rinse the shoes with clean water.
After ensuring your UGGs are sparkling clean, stuff the boots with rolled white towels to absorb the excess moisture and let them air-dry naturally for 24 to 48 hours.
However, don’t place your UGG boots under a direct heat source or direct sunlight to dry, since too much heat could damage their delicate sheepskin leather.
3. Cover the UGG Logo and Sole
While UGG boots don’t come with laces that you need to remove before dyeing them, most of these boots have a different colored sole and a UGG logo.
Unfortunately, once the dye sets in the UGG logo or the outsole, getting rid of the dye stains can be a hard nut to crack.
Therefore, it wouldn’t be advisable to dye the logo or outsole of your boots since that would completely distort their aesthetic appeal.
Rather, covering the UGG boots’ logo and the outsole of your UGGs with painter’s tape will go a long way in protecting them from the dye stains.
4. Stuff the UGG Boots with Paper Towels
After covering your UGGs logo and outsole, stuff the boots with paper towels or newspapers and ensure they cover from the toe to the heel to the hilt.
Stuffing paper towels or newspapers in your UGG boots is ideal since this maintains their perfect shape all through the dyeing process.
In addition, paper towel stuffing ensures that the suede dye doesn’t reach or mix with your UGGs’ fleece-lined interior, which could ruin them.
Alternatively, if you don’t have newspapers or paper towels, you could fill your boots to the brim with old rags or socks, provided they’re clean.
5. Apply and Spread the Dye on UGGs
Before you can apply and spread the dye on your UGGs, it’s important to read the manufacturer’s instructions to find out whether the dye must be diluted before application.
After ensuring everything is okay, wear rubber gloves and slowly and steadily start applying the dye on your UGGs, using the cotton ball dye applicator that most dyes come with.
Ensure the dye applicator’s bristles are wet before dipping them in the dye and drip off excess dye throughout the dyeing process to avoid uneven or dark spots.
Start by evenly applying the dye on broad, flat surfaces of your UGGs before embarking on spreading the dye on tighter nooks and crannies.
It’s worth noting that spreading too much dye on your UGGs could ruin their sheepskin leather. Thus, apply a healthy amount of dye to your boots.
6. Let the Dye Coat Dry
Freshly dyed UGGs should be left to sit in a cool, well-ventilated area for 24 hours to let them air-dry naturally.
Although the dye takes one or two hours to dry, it’s advisable to give your freshly dyed UGGs ample time to dry so as to restore their color permanently.
After 24 hours, you can opt to apply more dye coats if needed to get the best out of your UGGs since a perfect dyeing job could take even four coatings.
Once you’ve ensured that your UGGs are good to go, buff the outer surface to make the tiny fibers stand again and restore the boots’ aesthetic feel.
Conclusion
UGG boots are made from genuine sheepskin leather, which can be dyed to restore their former aesthetic glory.
Nevertheless, taking great caution when dyeing the sheepskin boots would be ideal to avoid permanently ruining their delicate leather outer. The UGGs dyeing steps outlined above are tested and proven to be effective.